Make PVC Pipe Airsoft Gun
An airsoft-type gun refers to any homemade weapon that fires a projectile without the use of gunpowder. Using a PVC pipe and a number of other parts acquired from around the house, you can make an airsoft-type gun. Adult supervision is required to use a knife if you are underage.
Instructions
1. Cut off the index finger of the rubber glove. Dispose of the rubber glove in the trash.
2. Place the open end of the rubber glove's index finger over one end of the PVC pipe. Push the index finger over the PVC pipe until it reaches about halfway down towards the other end.
3. Tape the sides of the index finger to the PVC pipe with a strip of electrical tape. Smooth the tape down with your fingers.
4. Wrap another strip of electrical tape around the sides of the index finger. Smooth the tape down.
5. Go outside in your backyard. Load a BB bullet into the PVC pipe. Grab hold of the BB through the rubber of the index finger.
6. Aim the PVC pipe gun you have made at a tree or rock. Pull back on the BB until the index finger is stretched fully out. Release your grip on the BB and index finger to fire the BB at the tree or rock.
Tips Warnings
You can shoot soft foam pellets instead of BBs from your PVC pipe gun.
Never aim any kind of projectile weapon at a person or pet.
Tags: make, pipe, airsoft, index finger, rubber glove, electrical tape, finger over, finger over pipe, finger pipe, index finger over, index finger over pipe
