Maytag Washer - PAV2300AWW - Agitator Came Off

Hi - First time poster, looking for some advice... During the course of running a load of laundry, I noticed the agitator auger was just free-floating. It actually had come loose from the base, and I cannot seem to snap it back onto the base. It looks as though it has plastic tabs that click together with the base. This looks like it should be a simple fix and not a call-a-repairman job; but, nonetheless, I've not figured it out. Does it sound as though the base or the auger needs to be replaced, or is there something in the connection of these two pieces that I am missing? Thanks in advance! Post model # I think on that model the agitator is a 1 piece assy, Can only be bought as assy. I think there is a bolt that goes through the top and bolts it to the shaft. Top of agitator may pop off and bolt will be there. Can tell more with model # he did post the mod# that is a one piece agitator that is held on with one bolt i believe Here is a breakdown of your agitator MAYTAG | Model #PAV2300AWW | WASHER | TUB (PAV2300) | SearsPartsDirect.com

Related Posts:

• 
  Maytag washer timer replacement part
  
  Maytag washer timer replacement partI have a Maytag close washer with a broken timer switch. I checked e-bay for a replacement under the part number 2-04454-2, and came up blank. Is there a differ...
  


• 
  Maytag front load washer problem
  
  Maytag Front Load Washer ProblemMy Maytag front load washer goes through the wash cycle until 02 minutes left, then flashes an F message. I cleaned the filter screens where the water lines connect...
  


• 
  Model mah8700aww maytag neptune washer wont spin
  
  Model MAH8700AWW MayTag Neptune Washer wont spin.Model MAH8700AWW MayTag Neptune Washer. The pump works and I have checked the hoses going into and out of the pump. I found no restrictions. The pu...
  


• 
  Maytag washer leaks
  
  Maytag washer leaksI recently tried to start a load of clothes. When I did I noticed that the washer was leaking from the back left side onto the floor. Figures, everything always goes to Haiti in...
  


• 
  May have run pressure washer with no pump oil confused
  
  May have run Pressure Washer with no pump oil! ...confusedTroy-Bilt 3000psi I went to change the oil on my pressure washer and could not find a drain bolt anywhere other than on what I believe to...